P0442 P0455 P0457 EVAP Leak Ford Mustang – Smoke Machine

2004 Ford Mustang EVAP Codes pulled with Genisys Scan Tool

Evaporative leak codes can be caused by broken fuel vapor lines, gas tank seals leaking, EVAP canister cracked, etc. EVAP codes can be some of the most difficult fault codes to diagnose. After pulling codes and checking the obvious by doing a quick visual inspection, to verify it’s not just a loose gas cap you’re dealing with. Bring out the smoke machine, it’s a great auto specialty tool that is really a necessity in any automotive repair shop today. In addition to checking for EVAP leaks, it can also be used to check vacuum leaks for lean codes and exhaust leaks that aren’t quite so easy to pinpoint.

Honda Civic Trailing Arm Bushing – How To

KD 41780 Automotive Bushing Driver Tool

Question: I’m changing out trailing arm bushing on a 99 Honda Civic will this product help me? KD Tools KD 41780 Bushing Kit Product #: KD 41780

Answer: The KD Tools 41780 kit could help if the diameter of the bushing is no bigger than 1 3/8″ in diameter. Otherwise you may want to remove the arm and take it to an auto repair shop or automotive parts store like NAPA that has a press. A lot of auto technicians that are skilled with an air chisel, use that for removal and then press larger bushings back in with a press.

Genisys Scan Tool Question – Flashing/Re-Programing Modules

Question:Will the Genisys Scan Tool with an 07 software update, flash the Electronic Power train Module on a 2001 Ford Windstar?  Will it also read out the ABS module program and reload in a replacement ABS module?  Will it do the same on GM vehicles?

Answer: The OTC Genisys scanner does not have any flashing or re-programming capability.  As far as I am aware, manufacturer specific or OEM (Original Equipment Manufacturer) scan tools are the only ones capable of this. The manufacturer specific scan tool for Ford, Lincoln and Mercury is the New Generation Star (NGS).